I2SoverUSB - I2S over USB Audio

Features of I2SoverUSB v.III Fully Isolated outputs

-            If external power supply is applied, all outputs are isolated from USB ground
-            Fully compatible with I2SoverUSB v.III board
-            XMOS XU208 processor, USB update
-            Sampling frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz,
             352.8kHz, 384kHz, 705.6kHz and 768kHz
-          16-, 24- and 32-bit resolution
-          DSD Audio over PCM frames. DSD64 (2.8224MHz and 3.0720MHz),
           DSD128 (5.6448MHz and 6.1440MHz) and DSD256 (11.2896MHz and
           12.2880MHz) by method DoP with 0x05/0xFA markers
-          DSD Native DSD64 (2.8224MHz and 3.0720MHz), DSD128 (5.6448MHz
            and 6.1440MHz), DSD256 (11.2896MHz and 12.2880MHz) and DSD512
            (22.5792MHz and 24.576MHz) on Linux and Windows, using Thesycon
             audio driver
-           Directly supports PCM1704, PCM63, PCM61, PCM58, PCM56, AD1862,
            AD1865, AD1861, AD1860, AD1851, TDA1541 in simultaneous mode
            and other compatible with listed DACs
-             Galvanic isolation (outputs, two oscillators and reclock, done by Xilinx
            CPLD are after the isolator)
-             NDK NZ2520SDA Ultra Low Phase Noise oscillators 45.158MHz and
              49.152MHz
-             Input for external master clock
-             LP5907 ultra low noise linear power regulator
-             No switch mode power supplies in the PCB board
-             Output for DAC configuration in DSD mode
-             I2S, right-justified data or left-justified data (external pin configuration) in            32-bit (channel frame)
-           SPDIF output – 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz,
           192kHz (16-24 bits)
-          I2S and S/PDIF outputs work simultaneously up to 192kHz
-            Automatic detection of data type (PCM or DSD)
-            Master clock outputs: 45.1584/49.1520MHz and 22.5792/24.5760MHz (I2S                  22.5792/24.5760MHz are reclocked by edge from 45.1584/49.1520MHz)
-            Three different ways to power the board, possible configurations:
             -    Power by USB bus
             -    The USB part is powered by USB bus, but the generators and the reclock                 are fed by a separate external power supply
             -    Both the USB part and the generators with the reclock are fed by two                            different external power supplies.
-            Dimensions: (LxWxH): 64.0 x 42.3 x 17.0 mm
-            For more information click here
Drivers:
-            No drivers needed for Linux with UAC2 compliant kernel
-            No drivers needed for MAC OS version 10.6.4 and above
-          ASIO/KS/WASAPI/Direct Sound drivers are necessary for Windows XP to 10
          (32 and 64 bit). Licensed XMOS USB Audio 2.0 Stereo Driver for            Windows can be downloaded from here

€ 75.00

Limited time offer for all output protocols

*Android devices compatible with USB Audio Player PRO. I2SoverUSB board is entirely external powered.

All items are in limited stock. Dispatch time is up to 3 weeks from the moment you placed the order. If item is in stock, we ship within 3 business days. Please contact us for available quantities.

Prices exclude VAT. If you're outside the EU, we won't charge you VAT.